Thinking About a Home EV Charger in Adelaide? Read This First

By Marcus Derbali — Licensed Adelaide Electrician (PGE 305056) • 4 min read

I'm Marcus from Amped Up Electrical Adelaide — licensed, owner-operated, and on the tools across Adelaide every week. Here's the plain-English version of something worth knowing.

Trickle charging is not the answer

Charging off a normal outlet is slow and not designed for sustained EV load. A dedicated wall charger is the right way.

Switchboard capacity first

Many homes need board work before a charger can be added safely. That assessment comes before anything else.

Plan the install

Charger position, cable route and load management all matter for a neat, safe, convenient result.

Home EV charging done properly in Adelaide

Charging an EV off a normal power point works until it doesn't — it's slow, it isn't designed for sustained load, and it ties up an outlet for half a day. A dedicated wall charger on its own protected circuit is the right way to charge at home, and it's a job worth getting right the first time.

The part people don't expect is that the switchboard usually comes first. Many homes need board capacity, proper protection or load management before a charger can be added safely. I check that up front so there are no surprises halfway through the job.

What a proper EV charger install involves

Switchboard capacity and protection assessed first
Dedicated, correctly-rated circuit for the charger
Charger placed for how you actually park
Tidy, protected cable route — no makeshift runs
Load management where the supply needs it
Tested and compliant to Australian standards

Done right, home charging is the most convenient way to run an EV — you wake up full every morning and never think about it. Done wrong, it's a fire risk on a circuit that was never meant for it.

Need a licensed electrician in Adelaide?

Marcus quotes upfront on call. Licensed SA electrician (PGE 305056), owner-operated, no subcontractors. See dedicated Adelaide page.

Call 0468 008 822

Frequently Asked Questions

Can my switchboard handle an EV charger?

Often it needs an upgrade or a dedicated circuit first — I assess this on site before any work.

Do you install any brand of charger?

I install quality units to Australian standards and can advise on a good match for your car and home.

Is home charging safe?

Properly installed on its own protected circuit, yes — far safer than makeshift solutions.

Do you cover Adelaide?

Yes — Adelaide and Adelaide's inner metro suburbs. Call 0468 008 822 and I'll confirm I can get to you and roughly when.

Are you licensed and insured?

Yes. Amped Up Electrical Adelaide is a licensed SA electrical contractor (PGE 305056), fully insured and owner-operated — you deal with the electrician, not a call centre.

Serving Adelaide and Adelaide's inner suburbs: Walkerville, Norwood, Prospect, Unley, Burnside, Magill, and surrounds.

Amped Up Electrical Adelaide • Licence PGE 305056 • ampedupelectricaladelaide.com.au

Published 2026-06-04