Marcus Derbali, owner electrician at Amped Up Electrical Adelaide Local Electrical Expert

Electrician for Erindale's 1960s-70s brick homes

Switchboard upgrades, fault finding and solar-ready boards for Erindale homes near Kensington Road. Owner-operated by Marcus from Vale Park.

Call 0468 008 822 Get Quote
97Google Reviews
Same WeekAvailability
100%Owner-Operated
PGE305056 Licensed
Electrician Erindale

Your Erindale electrician, an easy run from Vale Park

I'm Marcus, and Erindale is a straightforward trip east from my Vale Park base — along Payneham Road and Kensington Road and I'm usually there in 15-20 minutes. It's a suburb I get out to regularly, from switchboard upgrades to fault finding.

Erindale is a leafy pocket near Kensington Road and Newton Road, mostly brick homes from the 1960s and 70s with some newer builds mixed in on the bigger blocks. Homes of that era usually have a switchboard that was adequate when it was installed but has never been reassessed since — no individual RCBO protection on each circuit, and not much spare capacity once solar, a heat pump hot water system or an EV charger gets added to the mix. That's exactly the kind of job that comes up in Erindale: something else gets installed, and it exposes a switchboard that's been quietly running out of room for years.

Whether it's a straightforward safety switch upgrade or something a solar or EV installer has flagged as needing attention first, I look at the whole board before quoting, not just the immediate problem. Call 0468 008 822 and we'll work out what your Erindale property needs.

Call 0468 008 822 Get Quote
★★★★★
97 Google Reviews · 5.0★
5.0 rating • Adelaide electrician

What Erindale homes actually call me for

Erindale's 1960s-70s brick homes bring a fairly consistent list of work:

A recent job in Erindale

In September 2026 I upgraded an old switchboard on Kensington Road in Erindale. The trigger was a solar installer who'd flagged that the existing board had no room left for the RCBOs a new solar installation needed — a common problem on an older board that was never built for individual circuit protection in the first place. On top of that, the hot water system was wired into its own controlled-load circuit and had started tripping occasionally, which is exactly the kind of intermittent fault that tends to get worse rather than better.

I replaced the board with a fully individually-protected Hager setup, giving every circuit — including the hot water's controlled-load circuit — its own dedicated RCBO. That freed up the space the solar system needed and cleared the tripping fault at the same time, with the new equipment covered by the manufacturer's warranty and my own workmanship guarantee, set out in writing before the work went ahead. It's a good example of how one call-out for a solar-readiness check often uncovers a second problem worth fixing while the board's already open.

Recent Work

Every installation is owner-operated by Marcus. Clean work, quality components, compliant installations.

Finished Hager switchboard upgrade, every circuit on its own safety switch
Switchboard Upgrade Modern Hager board with safety switches, neat cable management
Ceiling fan installation by Amped Up Electrical
Ceiling Fan Install Quality fans, clean installation, no mess

A real switchboard upgrade — on video

Marcus films real jobs and callouts on the tools — no actors, no stock footage. This is what the work actually looks like.

Cat inspected the van, approved the job Customer’s RCBOs though? Cheap rubbish tripping for no reason. Now…Cat inspected the van, approved the job Customer’s RCBOs though? Cheap rubbish tripping for no reason. Now… (7K views)

More real jobs on TikTok @adelaideelectrician

Emergency electrician in Erindale

Erindale's 1960s-70s switchboards often have no individual circuit protection, and a controlled-load circuit feeding hot water can start tripping without warning as it ages. A board that's been quietly running near capacity for years can fail once one more appliance gets added.

24/7 emergency electrician for Erindale — what Marcus checks first, what to switch off while you wait, and how emergency callouts work, or call 0468 008 822 now.

Why Choose Marcus?

Marcus Derbali - Amped Up Electrical

Owner-Operated by Marcus

I personally handle every job from quote to completion. Licensed electrician on every job — never handed off. When you call, you speak to me. When I arrive in Erindale, it's me doing the work.

Licensed Electrician PGE 305056 | 97 Google Reviews · 5.0★ | Owner-operated since day one

Erindale electrical questions

My solar installer says my Erindale switchboard needs upgrading first — why?

This is common on older Erindale boards. Solar and battery systems need dedicated RCBO protection, and an older board often has no spare space or individual circuit protection at all, so the switchboard needs upgrading before the solar install can go ahead.

My hot water keeps tripping its controlled-load circuit — what's going on?

A controlled-load circuit that trips occasionally is usually a sign of an ageing breaker or a fault developing in that part of the board. It's worth having it looked at before it fails completely and leaves you without hot water.

Can you install an EV charger in Erindale?

Yes. I assess the switchboard's available capacity and the cable run to the charger position, then install a dedicated, properly protected circuit.

Do you do rental compliance checks in Erindale?

Yes, I carry out electrical safety inspections and written reports against the SA minimum housing standard.

Electrician near Erindale — nearby suburbs I cover

Erindale sits near Kensington Road in Adelaide's east. Here are the nearby areas I also service:

Get Your Quote

Call now or request a quote online.

Call 0468 008 822 Get Quote

Get Your Quote

Written quote • No obligation

✔️ Request Received!

Thanks! You'll hear from Marcus soon.

— Marcus, Amped Up Electrical

Call Marcus — 0468 008 822