Nailsworth is about as close as my work gets — my workshop at Vale Park is only a couple of minutes' drive away, so a Nailsworth callout rarely eats into the day the way a job on the other side of Adelaide does.
Nailsworth is a small, established pocket wedged between Prospect, Broadview and Sefton Park, mostly built out in the 1920s-1950s as solid brick bungalows and workers' cottages on tight blocks, with a run of newer townhouses and unit infill that's gone in along Main North Road and around the old shopping strip more recently. Because it's a rental-heavy suburb with a lot of strata and unit titles, I see more Certificate of Compliance and reconnection work here than in most of the surrounding area — earthing systems and metering boards that have sat untouched for decades and only get tested when a tenant changes or the power gets disconnected.
The older bungalows themselves are the other constant: original switchboards with ceramic fuses, no safety switch coverage, and just enough power points for a much simpler household. If you're in Nailsworth and something needs a proper look, call 0468 008 822 — I can usually be there the same day given how close it is.
Nailsworth's mix of old bungalows and newer strata units means the work here leans a particular way:
In September I was called out to inspect a set of units on Harvey Street after the power had been disconnected — the property needed a fresh Certificate of Compliance before it could go back on. Working through the main switchboard, the metering board and the earthing system, I found the main earthing conductor unclipped and lying loose on the ground with no electrode actually in service, and the original earth stake corroded through. I couldn't get a clean earth reading, so I wasn't able to sign off the reconnection on the spot. Instead I wrote up a proper condition report explaining exactly what needed fixing before the certificate could be issued — attendance, inspection and testing only, with the rectification quoted separately.
The body corporate authorised the rectification the same week. I went back, replaced the earth electrode and the main earthing conductor, re-established the main earth and neutral bond, and tested the whole earthing system to AS/NZS 3000 before lodging the Certificate of Compliance. It's a quick fix once it's authorised, but it's a good example of how a common-property earthing system can look fine for years and then fail the moment it's actually tested — which is exactly the point of an inspection before reconnection.
Every installation is owner-operated by Marcus. Clean work, quality components, compliant installations.
Marcus films real jobs and callouts on the tools — no actors, no stock footage. This is what the work actually looks like.
I personally handle every job from quote to completion. Licensed electrician on every job — never handed off. When you call, you speak to me. When I arrive, it's me doing the work.
Licensed Electrician PGE 305056 | 97 Google Reviews · 5.0★ | Owner-operated since day one
Nailsworth's older bungalows still running original ceramic-fuse boards are the ones most likely to fail suddenly, and strata unit blocks with a shared earthing system can lose power across several properties at once if that system faults. If the power's out, a safety switch won't reset, or something smells hot, that's an emergency call — not a wait-till-Monday job.
24/7 emergency electrician for Nailsworth — what Marcus checks first, what to switch off while you wait, and how emergency callouts work, or call 0468 008 822 now.
It's legal to leave an existing ceramic fuse board in place, but it won't have safety switch (RCD) protection, which is the real risk. A lot of Nailsworth's 1920s-1950s bungalows still have their original board. I can assess it and quote a straightforward upgrade to a modern RCBO switchboard.
Yes. I regularly inspect and test installations in Nailsworth for reconnection and rental Certificates of Compliance, including earthing systems on common property for unit blocks. If an installation can't be certified on the day, I write up exactly what needs fixing before it can be signed off.
Usually, yes, though shared switchboards and common-property earthing on strata unit blocks sometimes need body corporate sign-off first. I can look at the existing supply and switchboard and tell you plainly what's involved before quoting.
About as close as it gets. My workshop is at Vale Park, a couple of minutes' drive from Nailsworth, so getting to a job here rarely costs any real travel time.
Nailsworth sits right beside my own suburb, so I'm regularly in the immediate area:
Written quote before work starts • No obligation
Thanks! Your details are through to Marcus and he'll follow up soon.
— Marcus, Amped Up Electrical
